In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Standby Power
0.45 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Colour temperature
LED Wattage
1.4 W
Driver
Driver Type
Fixed output
Driver Included
Yes
Integrated Driver
Yes
Dimmable
No
Flex & Plug or Lead Length
1200 mm
Wiring Type
Re-wireable Flex & Plug (2 pin)
Emergency (EM suffix)
Emergency Mode
Non-Maintained
Emergency Classification
C0:D40, C90:D40
Emergency Output Power
1400 mW
Replacement Battery Code
01307
Emergency Duration
90 mins
Emergency Lumen Output
200 lm
Compliance
Standards
AS/NZS 60598.1
AS 60598.2.22
AS/NZS 61347.1
AS/NZS 61347.2.13
AS CISPR 15
AS/NZS 2293.3
Warranty
Warranty
5 Year Warranty, RTB
The total warranty period is shown above. Where an on-site period is listed, the first years are covered on-site, with return-to-base coverage for the remainder. For full warranty details and claim instructions, please refer to our Warranty page.